A. B. Enterprises
Masjid Bandar, Mumbai, Maharashtra
GST No. 27AAAFA2099R1ZY
TrustSEAL Verified
Call 08043045110
82% Response Rate
SEND EMAIL
We offer outstanding Industrial Chemical to our valued clients. Processed to accuracy, these chemicals find usage in various industrial applications. Longer shelf life, utility and precise pH value are the attributes owing to which these chemicals have attained apex of demands. Furthermore, keeping in mind diversified demands of the clients, we offer these chemicals in different packagings.
Product Details:
| Minimum Order Quantity | 250 Kg |
| Form | crystalline powder |
| Packaging Size | 50 kg |
| Chemical Name | 2,4-Dichlorophenoxyacetic acid 94-75-7 |
| Packaging Type | Bag |
| State of Matter | Crystals |
| Grade Standard | Chemical Grade, Industrial Grade |
| Country of Origin | Made in India |
| Properties | |
|---|---|
| Chemical formula | C8H6Cl2O3 |
| Molar mass | 221.04 g/mol |
| Appearance | white to yellow powder |
| Melting point | 140.5 °C (284.9 °F; 413.6 K) |
| Boiling point | 160 °C (320 °F; 433 K) 0.4 mm Hg |
| Solubility in water | 900 mg/L |
Additional Information:
Product Details:
| Minimum Order Quantity | 200 Kg |
| Functions | pheromone manufacturing |
| Usage/Application | Commercial |
| Chemical Name | 7-Octyn-1-ol 7-Octyn-1-ol PRODUCT : 7-OCTYN-1-ol CAS No. : 871-91-0 Synonym : 7-Octynol - Oct-7- |
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | pheromone manufacturing |
| Grade Standard | Elemental Gases, Industrial Grade |
| Physical State | Liquid |
PRODUCT : 7-OCTYN-1-ol
CAS No. : 871-91-0
Synonym : 7-Octynol - Oct-7-yn-1-ol - 7-Octyne-1-ol - 8-Hydroxy-1-octyne
Molecular Formula : C8H14O
Molecular weight : 126.20
Appearance : Clear, colourless to pale yellow liquid.
GC Purity : 96.0% minimum
7-Octyn-1-ol is the precursor to 7-octynoic acid. 7-Octyn-1-ol is also used in the production of the sex pheromone of citrus leafminer
Additional Information:
Product Details:
| Packaging Type | Packet , Bag |
| State of Matter | Crystals , Granular |
| Features | Oil Resistant , Heat Resistant |
| Packaging Size | Standard |
| Grade Standard | Chemical Grade, Industrial Grade |
| Physical State | Solid |
| Characteristic | Requirement |
| Physical Appearance Lumps | Variable Lumps from 1" to 4" size |
| Physical Appearance powder | Variable Powder form around 60 Mesh |
| Insoluble matters percent by weight maximum | 0.003 |
| Iron (Fe) percent by weight maximum | 100PPM |
| PH (of 5% solution) not less than minimum | 2.8 |
| Aluminum (Al2O3) percent by weight minimum | 0.17 |
Product Details:
| Packaging Type | Packet , Bag |
| Packaging Size | Standard |
| Features | Oil Resistant , Heat Resistant |
| Grade Standard | Industrial Grade, Elemental Gases, Chemical Grade |
| Physical State | Solid |
| State of Matter | Crystals , Solid, Granular |
| Appearance | white solid waxy flakes |
| Iodine value | Max 1 cc/100gm |
| Acid value | Max 5 mgkoh/gm |
| Saponification value | 109 - 120 mgkoh/gm |
| Melting point | 43 - 47 °c |
Product Details:
| Packaging Type | Bag , Packet |
| State of Matter | Liquid |
| CAS Number | 60-29-7 |
| Molecular Formula | C4-H10-O |
| Einecs | 200-467-2 |
| Structural formula | ch3-ch2-o-ch2-ch3 |
| Odor threshold | 0. 3 ppm |
Additional Information:
Product Details:
| Packaging Type | Bag , Packet |
| State of Matter | Granular |
| Features | Oil Resistant , Heat Resistant, Cold Resistant |
| Packaging Size | Standard |
| Grade Standard | Chemical Grade, Industrial Grade |
| Physical State | Solid |
| Molecular Formula | C6H5MgBr |
| Molecular Weight | 181.31g/mol |
| Density | 1.004 g/mL at 25 °C |
| Appearance (Color) | Dark Yellow to Brown |
| Appearance (Form) | Liquid |
| Titration | 0.90M to 1.10M |
| Sedimentation | NMT 2% W/W |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Grade Standard | Chemical Grade, Industrial Grade |
| CAS Number | 101-02-0 |
| Specific Gravity (g per cube cm) | 1.175 - 1.189 |
| Refractive Index | 1.580 - 1595 |
| Synonym | Phosphorus Acid Triphenyl Ester |
Product Details:
| Minimum Order Quantity | 25 Kilogram |
| Grade Standard | Industrial Grade |
| Packaging Type | Bag |
| State of Matter | Liquid |
| Features | Oil Resistant |
| Form of Chemicals | Granules, Solid |
| CAS Number | 7758-11-4 |
| Molecular Formula | K2HPO4 |
Di Potassium Phosphate
Different names Potassium monohydrogen phosphate, Phosphoric corrosive dipotassium salt, Potassium phosphate dibasic
CAS Number 7758-11-4
EC Number 231-834-5
Synthetic recipe K2HPO4
Molar mass 174.2 g/mol
Appearance white powder
Thickness 2.44 g/cm3
Softening point > 465 DegreeC
Solvency in water 149.25 g/100 mL
Solvency somewhat solvent in liquor
Additional Information:
Product Details:
| Packaging Type | Bag , Packet |
| State of Matter | Granular , Solid |
| Features | Oil Resistant , Heat Resistant, Cold Resistant |
| Packaging Size | Standard |
| Grade Standard | Chemical Grade, Industrial Grade, Elemental Gases |
| Physical State | Solid |
| Appearance | milky white amorphous powder. |
| Tin content | 32 % (± 0. 5 %) |
| Degradation | above 230º c |
| Moisture | < 0. 3 % |
| Density (gm/cc at 30º c) | 1.2 |
| Solubility | insoluble in water & soluble in all organic solvents. |
Product Details:
| Packaging Type | Bag , Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Elemental Gases, Industrial Grade |
| Physical State | Solid, Liquid |
| Molar mass | 94.11g mol1 |
| Density | 1.07g/cm3 |
| Melting point | 40.5°C,314k,105F |
| Boiling point | 181.7°C,455k,359F |
| Solubility in water | 8.3g/100 ml(20°C) |
| Acidity(pka) | 9.95 |
Product Details:
| Grade Standard | Industrial Grade,Elemental Gases |
| Packaging Type | Drum |
| State of Matter | Liquid |
| Physical State | Liquid |
| Features | Oil Resistant,Cold Resistant |
Product Details:
| Grade Standard | Industrial Grade,Elemental Gases |
| Packaging Type | Drum |
| State of Matter | Liquid |
| Physical State | Liquid |
| Features | Oil Resistant,Cold Resistant |
| Appearance | Clear light yellow to colorless liquid |
| Assay | 99.00% Min. |
| Isomer | 0.5% Max. |
| Ortho toluidine | 0.1% Max. |
| Solubility | Immiscible in water |
| Melting point | -62 ºC |
| Boiling point | 113-114 ºC |
| Molecular weight | 110.14 |
| Flash point | 8 ºC |
| Density | 1.001 @ 20ºC |
| Vap.pr. | 21 mmHg @ 20 ºC |
| Moisture | 0.5% Max. |
| Packing | HM HDPE Drum 200 kg net |
| Use | Pharma and Agro Intermediate |
| Storage | Store in cool and dry place. Keep away from Sun/ heat/ spark/ flame. Use spark proof tools and explosion proof equipment. No smoking. |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Cold Resistant, Oil Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Appearance | Colourless to pale yellow clear liquid |
| Assay | 14.5 ± 0.05 % |
| pH | 2.0 – 3.0 |
| Odor | Mild |
| Use | Min. 12 months in original packing away from heat and direct sunlight. |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Elemental Gases, Industrial Grade |
| Physical State | Liquid |
Product Details:
| Packaging Type | Bag |
| State of Matter | Granular |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade |
| Physical State | Crystals |
| CAS No. | 6080-58 |
| Molar Mass | 281.98 |
| Appearance | White powder |
Product Details:
| Packaging Type | Drum , Bag |
| State of Matter | Liquid , Solid |
| Features | Acid Resistant , Heat Resistant, Oil Resistant, Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Solid, Liquid |
| Molecular formula | C12H10Se2 |
| Molecular weight | 312.13 |
| Appearance | Orange powder |
| Solubility | Soluble in hot methanol |
| Melting point | 59'' - 61'' C |
| Assay (GC) | 99.5% min |
Additional Information:
Product Details:
| Packaging Type | Bag , Drum |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Solid, Liquid |
| State of Matter | Liquid , Solid |
| Molecular Formula | C4H4Na2O6 |
| Mol.wt. | 1945.5 |
| Appearance | White granules or crystals |
| Grade | Technical Chemically Pure/ FCC/IP/BP/USP/L.R/A.R |
| Uses | In Food Additives, Reagents, as sequestrate and stabilizer |
| Packing | 25/50 kgs Fibre Drums with double PP bags and inner liner |
Additional Information:
Product Details:
| Packaging Type | Bag |
| State of Matter | Solid , Granular |
| Features | Oil Resistant |
| Grade Standard | Industrial Grade |
| Physical State | Solid |
| Appearance | Clear to pale yellow liquid |
| Assay | 98.0% min |
| Use | Citronellyl Nitrile is stable and used in functional fragrance products where stability of odor and color is required |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Molecular Weight | 12.01 |
| Description | Black, Light Powder |
| Chloride | MAX. 0.1% |
| Heavy metals | MAX. 0.002% |
| Iron | MAX. 0.1% |
| Loss on drying | MAX. 15.0% |
| Methylene Blue Absorption ( 0.15% AQ. SOL.) | MIN. 180 MG/G |
| Residue on ignition | MAX. 3.0% |
| Solubility | practically insoluble in all usual solvents |
| Substance soluble in HCL | MAX. 3.0% |
| Sulfate | MAX. 0.1% |
| Water soluble matter | MAX. 1.0% |
Product Details:
| Packaging Type | Bag |
| State of Matter | Granular , Crystals, Solid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Chemical Grade, Industrial Grade |
| Physical State | Solid |
| Molecular formula | C13H22O |
| Molar mass | 194.35 |
| Density | 0.986 g/ml |
| Boiling point | 138 °C13 mm Hg |
| Purity | 0.99 |
| Moisture | 0.3 % Max |
Additional Information:
Product Details:
| Packaging Type | Drum |
| Features | Heat Resistant , Oil Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Physical State | Solid |
| State of Matter | Liquid |
| Molecular Weight | 74.1 |
| Boiling Point | 94° |
| FFRZ | -177°F |
| Sol | 0.08 |
| VP | 440 mmHg |
| IP | 9.53 eV |
| Sp.Gr | 0.71 |
| Fl.P | -49° |
| FUEL | 0.36 |
| LEL | 1.9% Class IA |
| Flammable liquid | Fl.P. below 73°F and BP below 100°F |
Product Details:
| Packaging Type | Drum , Bag |
| Features | Cold Resistant , Oil Resistant |
| Grade Standard | Elemental Gases, Industrial Grade |
| Physical State | Solid, Liquid |
| State of Matter | Liquid |
| Molecular Formula | C6 H7 NO2 |
| Molecular Weight | 137 |
| Physical Appearance | Yellow Fused Solidified Melt Flakes/Liquid |
| Assay, By Glc | 99.50 % min |
| Impurities :- | |
| Mnt | 0.40% max |
| Pnt | 0.10% max |
| Moisture | 0.05% max |
| Applications | Dyestuff Intermediates, Plastics, Pharmaceuticals |
| Packaging | 200 kg MS drums & Tanker loads |
Product Details:
| Packaging Type | Drum |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| State of Matter | Liquid |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Description | Colorless to Pale Yellow Liquid |
| Purity (by GC) | NLT 99% |
| Water (by KF) | NMT 0.5% |
Additional Information:
Product Details:
| Packaging Type | Bag , Drum |
| State of Matter | Granular , Liquid |
| Features | Acid Resistant , Heat Resistant, Oil Resistant |
| Grade Standard | Elemental Gases, Industrial Grade |
| Physical State | Liquid, Solid |
| Other Names | PVB |
| Molecular Formula | C4H6O2 |
| Grade Standard | Industrial Grade |
| Purity | 98% |
| Appearance | White powder or Granular |
| Application | Synthetic Resin and Plastic white powder Granular |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant, Cold Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Physical State | Liquid |
| Colour | Off white creamish powder |
| Solubility | Soluble in methanol |
| L.O.D . | 0.5 % Max |
| Melting point | 65 – 69° C |
| Assay by GC | 98 % min |
| Transmittance | 98.00% |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Appearance | Amber coloured viscous oily liquid |
| HLB value | 4.5 |
| Hydroxyl value | 185 - 195 mgkoh/gm |
| Acid value | Max 12 mgkoh/gm |
| Oleic acid content | Min 38. 0 % |
| Saponification value | 145 - 160 mgkoh/gm |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Appearance | Solid |
| Melting point | 32F |
| Boiling point | 212F |
| Molecular weight | 559.14 |
| Viscosity | N/P 4 |
| Storage | Tightly seal all partially used container. |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Cold Resistant , Oil Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Appearance | Colorless to yellowish liquid |
| Assay | ≥24.0-26.0 |
| pH | 41523 |
| Solubility | Well soluble in water |
| Density | 1.22-1.28 |
| Packing | 25kg |
| Use | Assistant brightener in nickel bath |
| Storage | Stored in cool and dry place |
| Phosphorous acid (as PO33)% | 3-10g/L |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Physical State | Liquid |
| Empirical Formula | C10H22O2 |
| Molecular mass | 174.27 g/mol |
| Appearance | Colourless liquid |
| Odour | Fresh, floral |
| Density (250C) | 0.925 – 0.933 g/mL |
| Refractive Index | 1.457 – 1.461 |
| Boiling Point | 124 - 1250C @ 10mm Hg |
| Assay | (GC, area%) > 95% |
| Occurrence | Found in blossom oils of Michelia alba, Murraya paniculate and Gardenia jasminoides |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Cold Resistant , Heat Resistant, Tear Resistant, Oil Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Appearance | Creamish white wax like powder |
| Melting point | 54-60 |
| Specification value | 140-155 |
| Moisture | |
| Use | Bakery, toffee & chocolates, pharmaceuticals, cosmetics |
| Storage | Light sensitive. Keep container tightly closed. Keep container in a cool, well-ventilated area. |
| Others | Monostearate: 40, free glycerine 10 |
Additional Information:
Product Details:
| Packaging Type | Bag , Packet |
| State of Matter | Granular , Crystals |
| Features | Oil Resistant , Heat Resistant |
| Grade Standard | Chemical Grade, Industrial Grade, Elemental Gases |
| Physical State | Solid |
| Molecular formula | (C6H5)2I2 |
| Molecular weight | 408.02 |
| Appearance | White to offwhite Solid |
| Assay | 98.0 % min |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Heat Resistant , Oil Resistant, Cold Resistant |
| Grade Standard | Industrial Grade |
| Physical State | Liquid |
| Appearance | Milky White Amorphous Powder |
| Tin Content | 32 % (± 0.5 %) |
| Degradation | Above 230º C |
| Moisture | < 0.3 % |
| Density (gm/cc at 30º C) | 1.2 |
| Solubilty | Insoluble in water & Soluble in all Organic Solvents |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Cold Resistant , Oil Resistant |
| Grade Standard | Elemental Gases, Industrial Grade |
| Physical State | Liquid |
| Characteristic | Requirement |
| Definition | contains not less than 98. 0 per cent and not more than 105. 0 per cent of cahpo42h2o |
| Description | white powder, odourless, tasteless. |
| Solubility | practically insoluble in water and in ethnol (95%), it dissoloves in dilute hydrochloric acid, and in nitric acid. |
| Identification a) phosphates b) calcium salts | positive positive |
| Acid insoluble substance %max | -- |
| Arsenic ppm max | 10 |
| Barium | to pass the test |
| Heavy metals ppm max | 40 |
| Iron ppm max | 400 |
| Carbonates | to pass the test |
| Chloride ppm max | 3300 |
| Sulphate % max | 0.5 |
| Reducing substances | to pass the test |
| Nitrate | - |
| Proteinous impurities | - |
| Loss on ignition | - |
| Monocalcium and tricalcium phosphates | should consume between 11 ml to 12. 5 ml of 1 m hcl |
| Assay % of cahpo4. 2h2o | 98. 0 to 105. 0 |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Characteristics | Specifications |
| Physical Appearance | Clear to pale yellowish liquid |
| Color | 50 APHA max |
| Acid value (mg KOH/gm) | 0.1% max. |
| Sp. Gravity | 0.985-0.996 |
| Refractive index | 1.526-1.530 |
Product Details:
| Packaging Type | Bag |
| State of Matter | Solid , Granular, Crystals |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Chemical Grade, Industrial Grade |
| Physical State | Solid |
| Appearance | Colorless or light yellow transparent liquid |
| pH | 2.0-3.0 |
| Packing | 250 kgs |
| Use | When used as scale inhibitor, less than 15mg/L is preferred, when used in closed circulating system, 150mg/L can be expected. |
| Storage | Storage for ten months in room shady and dry place. |
| Concentration in the bath | 50.0min |
| Total phosphonic acid (as PO43)% | 15.0min |
| Dryness weight loss % | 30.0min |
Product Details:
| Packaging Size | As per customer need |
| Features | Heat Resistant , Acid Resistant |
| Grade Standard | Chemical Grade |
| Physical State | Liquid |
| State of Matter | Liquid |
| Molecular formula | C5H10O |
| Molar mass | 86.13 g/mol |
| Density | 0.880 g/ml |
| Boiling point | 88 °C |
| Purity | 0.99 |
| Moisture | 0.3 % Max |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Alias | Octacosanol ,1-octacosanol, n-octacosanol |
| Color | White |
| Appearance | White powder |
| Usage | Health medicine, health food, beverage,cosmetics additives |
| Storage | Protect from light. Store in cool and dry places |
| Package | 25Kg/drum |
Product Details:
| Packaging Type | Bag |
| State of Matter | Granular , Solid |
| Features | Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Crystals |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Molecular Formula | ZnSeO3 |
| Molecular Weight | 192.35 |
| Appearance | White crystals |
| Solubility | insoluble in water |
| Total Moisture of Zinc Selenite | 0.5%max |
| Selenium Content | 40% min |
| Assay | 99%min (On Dry Basis) |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Chemical Name | C6H5NO3 |
| CAS NO. | (554-84-7) |
| M.W. | 139.11 |
| Assay {GC} | Min. 99.0% |
| Abs. Max. | PH 6.6 : 330- 333 nm PH 8.6 : 390nm |
| ph-transition range : | PH 6.6 - 8.6 almost colourless – yellow |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Solid , Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Elemental Gases, Industrial Grade |
| Physical State | Liquid, Solid |
| Molecular formula | CH3CH2COCH2CH3 |
| Molar mass | 86.13 °C |
| Density | 0.80-0.81 gm/ml |
| Moisture | 0.15% (max) by KF |
| Purity | 99% ( min) by GC |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Cold Resistant , Oil Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Composition | Composition It is available as 70% solution in water* |
| Purity min. (wt. %) by GC | 70.00 min |
| Water Content (max.) % by wt. | 29.86 max |
| Impurities (max.) % by wt. | 00.14 max |
| Packaging | MEA 70% soln. is available in 160kgs. UN Approved |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Molecular Formula | CH3CO2(CH2)11CH3 |
| Molecular Weight | 228.37 g/mol |
| Boiling Point | 150 C/15 mmHg(lit.) |
| Density | 0.865 g/mL at 25°C(lit.) |
| Appearance (Color) | Colorless |
| Appearance (Form) | Liquid |
| Identity | Confirms to structure by IR |
| Purity (GC) | ≥ 96.5% (Min) |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Appearance | clear light yellow liquid. |
| Tin content | 16. 50 - 17 % |
| specific gravity (gm/cc at 25º c) | 1. 08 (± 0. 01 %) |
| refractive index | 1. 48 – 1. 52 |
| Solubility | soluble in almost all organic solvents. Insoluble in water |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| Appearance | Amber transparent liquid |
| pH | 2.0-3.0 |
| Iron content | 20max |
| Density | 1.37-1.47 20 ºCg/cm3 |
| Chloride | 5.0max |
| Packing | 250 kgs |
| Use | It can be used as stabilizer for peroxide bleaching, detergent auxiliaries, in industrial & municipal cleaning water, terrestrial heat water, oilfield water, etc. |
| Storage | Storage for ten months in room shady and dry place. |
| Dryness weight loss % | 38.0-40.0 |
| Active content (DTPMP·Na7)% | 45.0-49.0 |
Additional Information:
Product Details:
| Packaging Type | Drum |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Physical State | Liquid |
| State of Matter | Liquid |
| Formula | C11 H22 O. CH2=CH – (CH2)8 CH2OH |
| Mol. Wt. | 170.3 |
| Purity | 98% min. by GC |
| Appearance & Colour | Colourless to pale yellow liquid |
| Odour | Fresh but rather fatty odour with citrusy waxy and rosy, petal like notes |
| BP | 245 deg. c. |
| Sp.Gr | 0.85 |
| Acid value | 5 max. |
| Storage | In hdpe or ss or glass or Aluminium containers. Preferably full or under neutral gases like carbon Dioxide or nitrogen |
| Uses | Finds some use in perfume compositions, mainly to give “lift’’ to Rose, Jasmine, Magnolia, violet, Lilac, Cassie and other floral fragrances and also in Citrus top notes or fruity notes |
Product Details:
| Packaging Type | Packet, Bag |
| Grade Standard | Industrial Grade,Chemical Grade,Elemental Gases |
| State of Matter | Granular, Crystals |
| Features | Oil Resistant, Heat Resistant, Cold Resistant |
| Physical State | Solid |
| Molecular formula | C5H8O |
| Molar mass | 84.12g/mol |
| Density | 0.948 – 0.952g/cc |
| Boiling point | 130?`131 |
| Flash Point | 30 |
| Purity | 99.0% min |
| Moisture | 0.3% max |
Additional Information:
Product Details:
| State of Matter | Solid, Granular |
| Features | Heat Resistant, Oil Resistant, Cold Resistant |
| Packaging Type | Bag,Sac |
| Grade Standard | Industrial Grade |
| Physical State | Solid |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Elemental Gases |
| Physical State | Liquid |
| Description | Pale yellow coloured powder |
| Odour | Faint odour of bromine |
| Melting Point | 1860 C to 1940C |
| Loss on dring | 1% max |
| Purity | 98. min |
| Bromine Content | 55% to 55.8% |
| Fe content | <10ppm |
| Iron | 10 ppm |
| Zinc | 0.5ppm |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Elemental Gases |
| Physical State | Solid,Liquid |
| Chemical name | 4- amino- 4'-nitro-2,2'-stilbene disulfonic acid |
| CAS no. | 119-72-2 |
| Molecular Weight | 400.38 |
| Molecular Formula | c14h12o8n2s2 |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant,Heat Resistant |
| Grade Standard | Industrial Grade,Chemical Grade |
| Physical State | Liquid |
| Appearance | Colorless to Yellowish liquid |
| Assay | ≥95.0(GC) |
| Solubility | Non-soluble in water well soluble in acid |
| Density | 0.80-0.82 |
| Packing | 20kg |
| Use | Brightener and leveling agent in nickel bath |
| Storage | Stored in cool and dry place |
| Phosphorous acid (as PO33)% | 1-10mg/L |
Additional Information:
Product Details:
| Packaging Type | Sac,Packet |
| State of Matter | Granular,Crystals,Solid |
| Features | Oil Resistant,Heat Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Chemical Grade |
| Physical State | Solid |
| Trade Name | Vinyl Sulphone Ester of Aniline |
| Chemical name | 1-amino benzene 4-beta hydroxy ethyl sulfone ester sulphuric acid |
| Strength | 96% minimum |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Elemental Gases |
| Physical State | Liquid |
| Product | 5-Nitroisophthalic acid monomethyl ester |
| CAS NO. | [1955-46-0] |
| Molecular formula | C9H7NO6 |
| Molecular weight | 225.2 |
| Description | off-white crystals. |
| Solubility | soluble in methanol |
| Melting point | 180' C |
| Moisture Content | 0.5% Max. |
| Residue on ignition | 0.5% max. |
| Assay | 98% min. |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Elemental Gases |
| Physical State | Liquid |
| Molecular Formula | C8H17Br |
| Molecular Weight | 193.12 g/mol |
| Contains | 1% potassium carbonate as stabilizer |
| Boiling Point | 75-77°C/16 mmHg(lit.) |
| Density | 1.086 g/mL at 25°C(lit.) |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Elemental Gases |
| Physical State | Liquid |
| Appearance | Clear liquid colorless to yellow |
| Assay | 99.5% Min. |
| Solubility | Insoluble in water |
| Melting point | 0 ºC |
| Boiling point | 172-174 ºC |
| Molecular weight | 164.9 |
| Flash point | 36 ºC |
| Density | 1.409 @ 20ºC |
| Moisture | 0.5% Max. |
| Other impurities | 0.5% Max. |
| Packing | HM HDPE Drum, 200 kg net |
| Use | Pharma intermediate and Agro Intermediate |
| Storage | Store in tightly closed container in a cool and dry place. Keep away from Sun/heat, spark, flame. Use proof tools and explosion proof equipment. No smoking |
Additional Information:
Product Details:
| Packaging Type | Bag,Packet |
| State of Matter | Solid,Granular,Crystals |
| Features | Oil Resistant,Heat Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Chemical Grade,Elemental Gases |
| Physical State | Solid |
| Molecular Weight | 252 |
| Molecular Formula | C15H12N2O2 |
| Appearance | white crystals or powder |
| Solubility | Clear Solution in 5 ml 1N NaoH + 20 ml water (1gm Sample) |
| Loss on Drying | Not more than 0.5 % |
| Melting Range | 295o - 297o C |
| Assay | NLT 98.0 % |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Elemental Gases |
| Physical State | Solid,Liquid |
| Appearance | Clear, pale beige liquid |
| Specific Gravity | 0.934-0.939 |
| Melting point | -33.5 C |
| Boiling point | 186 C |
| Flash point | 95 C |
| Refractive index | 1.405-1.414 |
| Use | It is used in flavorings, perfumes, plasticizers and pharmaceuticals. This compound reacts with bases, oxidizing agents and reducing agents |
Additional Information:
Product Details:
| Packaging Type | Bag,Packet |
| State of Matter | Solid,Granular,Crystals |
| Features | Oil Resistant,Heat Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Chemical Grade |
| Physical State | Solid |
| Appearance | Solid, white |
| Assay | 99.5% Min. |
| 2 chloro 5 fluoro toluene | 0.5% Max. |
| Melting point | 33-36 ºC |
| Boiling point | 188 ºC @ 750 mmHg |
| Molecular weight | 121.11 |
| Flash point | 65 ºC |
| Moisture | 0.1% Max. |
| Other impurities | 0.1% Max. |
| Packing | HM HDPE drum of 50 kg capacity |
| Use | Pharma and Agro Intermediate |
| Storage | Store in tightly closed container in a cool and dry place. |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Elemental Gases |
| Physical State | Liquid |
| Appearance | White Powder |
| Assay | 99.00% Min. |
| Melting point | 239 ºC |
| Molecular weight | 218 |
| Packing | HM HDPE Drum |
| Use | Pharma intermediate (Pantaprazole) |
| Storage | Store in cool and dry place.Keep away from Sun/heat, spark, flame. Use spark proof tool and explosion proof equipment.No smoking |
Additional Information:
Product Details:
| Packaging Type | Bag,Packet |
| State of Matter | Granular,Crystals |
| Features | Oil Resistant,Heat Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Chemical Grade,Elemental Gases |
| Physical State | Solid |
| Molecular formula | C10H10O |
| Molar mass | 146.19g/mol |
| Density | 1.09 – 1.10g/ml |
| Boiling point | 255 - 257 |
| Flash Point | 110 |
| Assay | 98.0% min |
| Moisture | 0.3% max |
Additional Information:
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Elemental Gases |
| Physical State | Liquid |
| Appearance | Orange yellow liquid |
| Assay | ≥45.0 |
| pH | 41548 |
| Solubility | Well soluble in water |
| Density | 1.13-1.19 |
| Packing | 25kg |
| Use | Brightener and leveling agent at LCD and MCD in nickel bath |
| Storage | Stored in cool and dry place |
| Phosphorous acid (as PO33)% | 10-100mg/L |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Physical State | Liquid |
| Appearance | Pale yellow solid |
| Amine value | 20 max (KOH mg/g) |
| Use | Pharmaceuticals, agricultural preparations, and textile processing; rust inhibiting, latex stabilizing, anti-static function in textiles, dye-leveling, waterproofing and water-in-oil additives as well as very good emulsifying |
| Others | 4.0% max, 10.5% max (Glycerine) |
Additional Information:
Product Details:
| Packaging Type | Drum , Bag |
| State of Matter | Solid , Liquid |
| Features | Cold Resistant , Oil Resistant |
| Grade Standard | Elemental Gases, Industrial Grade |
| Water solubility | 100 % |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Heat Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Physical State | Liquid |
SV cat 201 is a neutral catalyst mostly applied for faster rate of reaction, improves colour, better control of reaction in esterification,Trans-esterification, & polycondensation processes. It is an efficient catalyst to minimize impurities, improves product quality, yield, leads to bring down reaction time, power consumption & hence cost of the production. Mainly used in preparation of esters, polyesters, alkyd resins and esters of methacrylates etc.
Recommended doses:
Approximately 0. 1 % of total reaction mass.| Appearance | milky white amorphous powder. |
| Tin content | 47 % (± 0. 5 %) |
| Degradation | above 340º c |
| Volatility | 1 – 1. 5 % |
| Density (gm/cc at 20º c) | 1. 30 – 1. 40 |
| Solubility | insoluble in water & most of organic solvents. |
Product Details:
| State of Matter | Liquid |
| Features | Oil Resistant , Heat Resistant |
| Grade Standard | Industrial Grade |
| Physical State | Liquid |
| Appearance | White Crystalline Powder |
| Assay | NLT 99 % |
| Moisture | NMT 0.5 % |
| Use | Phase transfer catalyst;Catalyst in the production of epoxy resins; Catalyst in the production of powder coatings. |
| Storage | Store in a well ventilated place. Keep container tightly closed. Store locked up. |
Additional Information:
Product Details:
| Packaging Type | Sac, Bag, Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Trade name | P. A. A. B. S. A. |
| Chemical name | para amino azo benzene 4 sulphonic acid |
| Strength | 60% minimum para amino azo benzene 4 sulphonic acid |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
Product Details:
| State of Matter | Liquid |
| Features | Acid Resistant |
| Physical State | Liquid |
| Concentration (%) | 15 |
| Molecular formula | C19H30O2 |
| Molecular weight | 290.44 |
| Quality standard | melting point: 172 174 specific rotation +88o +94oLoss on drying≤ 0.5% Ignition residue≤ 0.1% Related substances≤ 1% Heavy metal≤ 10ppm content≥ 98% |
| Characters | white crystal powder with invisible impurities |
| Use | androgenic hormone |
| Packing | general package or packing according to demands |
Additional Information:
Product Details:
| Grade Standard | Industrial Grade,Chemical Grade |
| Packaging Type | Bag,Sac,Packet |
| State of Matter | Solid,Granular,Crystals |
| Features | Oil Resistant,Heat Resistant,Cold Resistant |
| Molecular Formula | CH3(CH2)7Br |
| Molecular Weight | 193.12 g/mol |
| Boiling Point | 201°C(lit.) |
| Melting Point | -55°C(lit.) |
| Density | 1.118 g/mL at 25 °C(lit.) |
| Appearance (Color) | Colorless to light yellow |
| Appearance (Form) | Liquid |
| Identity | Confirms to structure by IR |
| Purity (GC) | > 98.5% (Min) |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Molecular Formula | C23H33NO3 |
| Molecular Weight | 371.52 |
| Melting Point | 208-213 Moisture Content:≤0.5% |
| Physical Property | Yellowish or white powder |
| Packing | 20 kg per bag |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Heat Resistant |
| Grade Standard | Chemical Grade |
| CAS Number | 7722-76-1 |
| Appearance | white tetragonal crystals |
| Density | 1.80 g/c |
| Melting point | 190 °C, 463 K, 374 °Fm3 |
| Grade | ASC |
Product Details:
| Packaging Type | Sac , Bag, Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Chemical Name | 4''4'' diamino stilbene 2''2'' disulfonic acid |
| CAS No. | 29898 |
| Mol Wt. | 370.4 |
| Mol. Formula | C14H14O6N2S2 |
Product Details:
| Packaging Type | Bag , Sac |
| State of Matter | Solid , Granular, Crystals |
| Features | Oil Resistant , Heat Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Appearance | White Fine Powder |
| Bulk Density (gm/cc) | 0.65 – 0.70 |
| Lead Content (as PbO) | 58 – 60 % |
| Specific Gravity | 2 – 2.2 |
| Fineness (Through 240 Mesh) | 99 % Passes |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Ethyl Glycol Test Description | Specification Limits Min. Max. | Unit of Measure | Test Method |
| Colour | 10 | - | APHA |
| Acidity ,as CH3COOH | 0.01 | % | |
| Specific Gravity @ 20deg.C | 0.929 | 0.934 | Kg/l |
| Distillation range | 132 | 138 | Deg |
| Moisture | 0.2 | % | - |
| Purity | 99 | % | - |
Product Details:
| Packaging Type | Bag , Drum, Sac |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Chemical Formula | C34H23N6O14S4Na4 |
| Molecular Weight | 960.82 gm/mole |
| Absorption Max | 608-610 nm |
| Absorptivity (A1%/1cm.) | > 600 |
| Dye Content | >60% |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Molecular Formula | C6H12O3 |
| Molecular Weight | 132.16 |
| Classifications | Solvent, Ester, Alcohol |
| Ester Content | 97 % Min |
| Water solubility, grams/liter | 20 |
| Density, grams per milliliter | 1.02 |
| Pounds per gallon | 8.5 |
| Boiling point | 186-200°C |
| Flash point (closed cup) | 75°C |
| Freezing point | -26°C |
Product Details:
| Packaging Type | Bag , Sac |
| State of Matter | Crystals , Solid |
| Features | Oil Resistant , Heat Resistant |
| Physical State | Solid |
| Appearance | Colorless clear oily liquid |
| Assay | 99.00 %+ BY G.C |
| Specific Gravity | 0.98400 to 0.99200 @ 25.00 °C |
| Boiling Point | 261.00 to 262.00 °C. @ 760.00 mm Hg |
| Flash Point | > 230.00 °F. TCC (> 110.00 °C.) |
| Acid Value | 1.00 max. KOH/g |
| Vapor Pressure | 0.026000 mm/Hg @ 20.00 °C |
| Odour | Mild, Sweet, Balsamic, Fruity |
| Packing Detail | 0.5kg to 170kg |
Product Details:
| Packaging Type | Bag , Packet |
| State of Matter | Granular |
| Packaging Size | Customized |
| Physical State | Crystals |
| A | Properties | Zeosil Excel |
| 1 | Appearance | Free Flowing Powder |
| 2 | Color | Gray to Cream Yellow |
| 3 | Bulk density (gm / cc) | 0.68-0.72 |
| 4 | PH (2 % Slurry) | 6.5-7.0 |
| 5 | Moisture | 6-8 % |
| 6 | Particle Size | . |
| . | 100 mesh | 1 |
| . | 200 mesh | 0.9 |
| . | 230 mesh | NIL |
| 7 | Filtration rate | xxxx |
| 8 | Required dosage % | xxxx |
| 9 | Oil Retention | < 20% |
| 10 | Recommended Oil | Sunflower, Cotton, Palm |
| 11 | Residual Acidity | NIL |
| 12 | Manufacturing Process | Thermal Processed Activated Bleaching Earth |
| 13 | Heavy Metal Content | NIL |
Product Details:
| Packaging Type | Sac , Bag, Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Appearance | Clear viscous oily liquid |
| Mono glycerides content | Min 60% |
| Iodine value | 70 - 85 cc/100gm |
| Acid value | Max 3. 0 mgkoh/gm |
| Saponification value | 150 - 175 mgkoh/gm |
| Color ( astm, d1500 ) | Max 3. 0 |
Product Details:
| Packaging Type | Bag , Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Chemical Formula | C20H19N4Cl |
| Molecular Weight | 350.84 gm/mole |
| Appearance | Dark green/brownish green powder |
| Solubility 0.1% (Aq.) | Clear red solution |
| Absorption Max (Aq.)λ max. | 546-551 nm |
| Absorptivity (A1%/1cm Aq. at λ max.) | > 800 |
| Loss On Drying at 110° c (1 hr.) | < 5% |
Product Details:
| Packaging Type | Bag , Sac, Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Molecular Formula | C6H12O2 |
| Molecular Weight | 116.16 g/mol |
| Boiling Point | 108-111 C (lit.) |
| Density | 0.863-0.869 g/mL at 2 |
Additional Information:
Product Details:
| Packaging Type | Packet , Sac, Bag |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Appearance | Clear Yellow Viscous Liquid. |
| Tin Content | 17.50 – 18.50 % |
| Density (gm/cc at 20º C) | 1.190 – 1.198 |
| Refractive Index | 1.483 – 1.493 |
| Solubilty | Soluble in Benzene & Organic Esters. |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| Packaging Size | Customized |
| Physical State | Liquid |
| State of Matter | Liquid |
| Appearance | Yellow to amber viscous oily liquid |
| Solubility | Insoluble in water, soluble in mineral oil, alcohol |
| Flash point | Min 270°c |
| Acid value | Max 3 mgkoh/gm |
| Saponification value | 170 - 190 mgkoh/gm |
| Moisture by KFR | Max 1% |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Hand, Arm and Body Protection: | Other Protective Clothing and Equipment: | Engineering Controls: |
| Impervious gloves should be worn. Protective, impervious clothing should be worn in presence to prevent contact with skin (coveralls, boots, etc.) | Protect open wounds. Heating to decomposition requires full protective clothing and self-contained breathing apparatus. | Adequate ventilation to maintain fluoride concentrations below applicable standards. |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| State of Matter | Crystals |
| Packaging Size | Customized |
| Physical State | Crystals |
| Molecular Formula | Na2SeO3 |
| Molecular Weight | 172.94 |
| Appearance | White to off white Crystalline Powder |
| Solubility | freely soluble in water |
| Selenium Content | 45 % min |
| LOD (By IR) | 0.5 % max. at 110° C for 1 hr |
| Iron as Fe | 0.02 % max |
| Sulphate as SO4 | 0. 2% max |
| Assay | 98.5 % min (on dry basis) |
Product Details:
| State of Matter | Liquid |
| Features | Heat Resistant , Oil Resistant |
| Grade Standard | Industrial Grade |
| Physical State | Liquid |
| Molecular Formula | [CH3(CH2)8CO]2O |
| Molecular Weight | 326.51 g/mol |
| Boiling Point | 125-140 °C/0.05 mmHg(lit.) |
| Melting Point | 24-25 °C(lit.) |
| Density | 0.886 g/mL at 20°C(lit.) |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Heat Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Test Description | Specification Limits Min. Max. | Unit of Measure | Test Method |
| Purity | 99.9 | % | ASTM –D4961 |
| Appearance | Clear colorless liquid | - | Visual |
| Color ( pt/co –Scale) | 10 | - | D-1686 |
| Solidification point(dry basis) | 40.4 | % | - |
| Miscibility in Water | Clear at 20 degree C | - | D-1722 |
| Density ( 50oC) | 1.047 -1.053 | g/ml | D-3505 |
Product Details:
| Packaging Type | Bag , Sac |
| State of Matter | Solid , Granular, Crystals |
| Features | Oil Resistant , Heat Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Molecular Formula | K2 Te O3 |
| Molecular weight | 182.7 |
| Assay | 90% |
| Chloride (CL) | 0.05% Max |
| Nitrate (NO3) | 0.05% Max |
| Iron (Fe) | 0.02% Max |
| Packaging Details | Min 10 kgs to 100 kgs in plastic jar pack |
Product Details:
| Packaging Type | Bag |
| Features | Oil Resistant , Heat Resistant |
| Grade Standard | Chemical Grade, Industrial Grade |
| State of Matter | Crystals , Granular, Solid |
| Molecular Formula | C2H6AINO4 |
| Molecular Weight | 137.07 |
| Chlorine ppm | ≤ 330ppm |
| Arsenic ppm | ≤ 2ppm |
| Heavy Metal ppm | ≤ 10ppm |
| PH4 | 6.5-7.5 |
| Sulfate ppm | ≤ 0.288% |
| Content (N) | 94.0-108.0 |
Product Details:
| State of Matter | Solid, Granular, Crystals |
| Features | Cold Resistant, Oil Resistant, Heat Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Physical State | Solid |
| Molecular Formula | C13 H18 O2 |
| Molecular Weight | 206 |
| Boiling Point | 268°c (760mm Hg) |
| Assay | Sum of Isomers 97-100 % |
| Appearance | Clear Colourless to pale yellow liquid, Non- viscous liquid |
| Specific gravity | 1.047 – 1.057 |
| Refractive Index | 1.488 – 1.492 |
| Flash Point | 100°C |
| Solubility | Soluble in alcohol, insoluble in water |
Product Details:
| Packaging Type | Sac , Bag |
| State of Matter | Granular , Solid |
| Features | Cold Resistant , Oil Resistant, Heat Resistant |
| Grade Standard | Industrial Grade |
| Molecular Formula | C12H22O3 |
| Molecular Weight | 214.31g/mol |
| Boiling Point | 246-248 °C(lit.) |
| Melting Point | -12.4 C(lit.) |
| Density | 0.928 g/mL at 20°C(lit.) |
| Appearance (Color) | Colorless |
| Appearance (Form) | Liquid |
| Identity | Confirms to structure by IR |
| Purity (GC) | ≥ 98% (Min) |
Additional Information:
Product Details:
| Packaging Type | Bag , Sac |
| State of Matter | Solid , Crystals |
| Features | Oil Resistant , Heat Resistant, Cold Resistant |
| Grade Standard | Industrial Grade |
| Appearance | Low viscous oily liquid |
| Mono glycerides content | xxxx |
| Iodine value | Min 85 |
| Acid value | Max 3.0 mgkoh/gm |
| Color ( astm, d1500 ) | Max 2.5 |
| Solubility | insoluble in water & methanol , soluble in xylene & mineral oil |
| Saponification value | 176 - 195 mgkoh/gm |
Product Details:
| Packaging Type | Bag |
| State of Matter | Granular , Solid |
| Features | Oil Resistant , Heat Resistant, Cold Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
Product Details:
| Packaging Type | Bag , Packet |
| State of Matter | Crystals , Granular, Solid |
| Features | Cold Resistant , Heat Resistant, Oil Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Molecular Formula | C8H14O3 |
| Molecular Weight | 158.19 g/mol |
| Boiling Point | 195°C(lit.) |
| Melting Point | -73°C(lit.) |
| Density | 0.963g/mL at 25°C(lit.) |
| Appearance (Color) | Colorless |
| Appearance (Form) | Liquid |
| Identity | Confirms to structure by IR |
| Purity (GC) | ≥ 98 (Min) |
Product Details:
| Packaging Type | Drum |
| Grade Standard | Industrial Grade, Chemical Grade |
| Physical State | Liquid |
| State of Matter | Liquid |
Product Details:
| Packaging Type | Bag , Packet |
| State of Matter | Crystals , Solid, Granular |
| Features | Heat Resistant , Cold Resistant, Oil Resistant |
| Grade Standard | Industrial Grade, Chemical Grade, Elemental Gases |
| Molecular Formula | (CH3CH2CO)2O |
| Molecular Weight | 130.14 g/mol |
| Boiling Point | 167 °C(lit.) |
| Melting Point | -43 °C(lit.) |
| Density | 1.015 g/mL at 25 °C(lit.) |
| Appearance (Color) | Colorless |
| Appearance (Form) | Liquid |
| Identity | Confirms to structure by IR |
| Purity (GC) | ≥ 96% (Min) |
| Titration With Morpholine | 96.5% - 103.5% |
Product Details:
| Brand | Pidilite , Asian Paints |
| Categories | Adhesives |
| Functions | Antioxidants , Lubricants |
| Form of Chemicals | Liquid |
| Other Names | Hexamine, Urotropine |
| Molecular Formula | C6H12N4 |
| Grade Standard | Industrial Grade, Medicine Grade, Reagent Grade |
| Purity | 99.5 |
| Appearance | White |
| Application | Agent |
Additional Information:
Product Details:
| Brand | Pidilite |
| Categories | Agrichemicals |
| Functions | Antioxidants |
| Form of Chemicals | Liquid |
| Assay | 99.80% |
| Color | 10 |
| Density(g/ml) | 0.714 |
| Nonvolatile Matter | 0.00% |
| Water | 0.05% |
| Ethyl Alcohol | 0.05% |
| Acidity as Acetic acid | 0.001% |
| Appearance | Liquid |
| Colour | Colourless |
| Odour | Characteristic |
| Boiling Point (°C) | 34 |
| Melting Point (°C) | -116 |
| Relative Density | 0.71 |
| Vapour Density (air=1) | 2.56 |
| Vapour Pressure | 400 mm Hg V |
| Vapour Pressure | 18 |
| Flash Point (°C) | -45 |
| Auto Ignition Temperature (°C) | 170 |
| Flammability Limit – Lower(%) | 1.7 |
| Flammability Limit – Upper(%) | 48 |
| Solubility Value (g/100g H2O@20°C) | 6.9 |
Product Details:
| Categories | Oil Field Chemicals, Adhesives, Agrichemicals |
| Functions | Antioxidants , Biocides, Catalysts |
| Form of Chemicals | Liquid |
| Brand | Pidilite |
| Tests | limits(as per i. P. 1996) |
| Description | white amorphous powder odourless |
| Solubility | to pass the test |
| Identification | positive |
| Acid insoluble substances | 0. 30% max |
| Water soluble substances | 0. 5% max |
| Arsenic | 5. 00 ppm |
| Heavy metals | 40 ppm |
| Iron | 200 ppm |
| Carbonate | to pass the test |
| Chloride | 500 ppm |
| Sulphate | 0. 60% max |
| Protenous impurities | to pass the test |
| Loss on ignition | 8. 00% max |
Product Details:
| Packaging Type | Bag |
| State of Matter | Granular , Solid |
| Features | Oil Resistant , Cold Resistant |
| Grade Standard | Industrial Grade, Elemental Gases |
| Test Description | Specification Limits Min. Max. | Unit of Measure | Test Method |
| Methoxy Propanol | 99.5 | %(w/w) | Gas Chromatography |
| PM beta Isomer (PM-2) | 0.5 | %(w/w) | Gas Chromatography |
| Water | 0.1 | %(w/w) | ASTM E-203 |
| Acidity as Acetic acid | 0.01 | %(w/w) | ASTM D-1613 |
| Colour, PTCO | 10 | ASTM D-1209 | |
| Specific Gravity | 0.918 | 0.969 | ASTM D-4052 |
| Distillation IBP@760 mm Hg | 117 | ||
| Distillation DP@760 mm Hg | 125 | oC | ASTM D1078 |
Product Details:
| Packaging Type | Bag,Sac,Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Appearance | Colorless to yellowish liquid |
| Assay | ≥60.0(UV) |
| pH | 41458 |
| Solubility | Well soluble in water , separate out at low temperature |
| Density | 1.27-1.29 |
| Packing | 25kg |
| Use | Impurity tolerance |
| Storage | Stored in cool and dry place |
| Phosphorous acid (as PO33)% | 1-20mg/L |
Additional Information:
Product Details:
| Packaging Type | Bag,Sac,Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Other Names | TCC ,Trichlocarban |
| Mol.Formula | 315.59 |
| EINECS No. | 238-750-8 |
| Type | Syntheses Material Intermediates, Antimicrobial |
| Purity | Min.98% |
| Application | Used insoap, shampoo, bodywash etc |
| Appearance | White Fine Powder |
| Description | TCC is a high-effective and broad-spectrum antimicrobial. It has the bactericidal characteristics of continuance |
| Description | White Fine Poder |
| Odour | Chracteristic odour |
| Melting Point | 250-255oC |
Product Details:
| Packaging Type | Bag,Sac,Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Chemical name | 3,4-dimethylphenylboronic acid |
| Synonyms | akos brn-0224, rarechem ah pb 0185, 3,4-dimethylphenylbo, 3,4-dimethylphenylboronic acid 3,4-diemthylphenylboronic acid, 3,4-dimethylbenzeneboronic acid, 3,4-dimethylphenylboronic acid,97%, 3,4-dimethylphenylboronic acid ,98%, 3,4-dimethylbenzeneboronic acid, 98+% |
| Cbnumber | cb8668145 |
| Molecular formula | c8h11bo2 |
| Formula weight | 149.98 |
Additional Information:
Product Details:
| Packaging Type | Bag,Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Appearance | White or almost white crystalline powder |
| Assay | ≥ 99.0% |
| Boiling point | 122-126 (0.7Kpa) |
| Acidity | 1% w/v |
| Packing | 25 kgs |
| Use | DBNPA biocide formulations are used to treat raw materials, processing water, and various recycle water systems in Pulp, paper & paperboard mills to control slime, cooling system, recirculating cooling tower, cooling ponds, and lagoons, Evaporatice condensers, Heat exchangers, scrubbers |
| Storage | Keep in a tightly closed container, stored in a cool, dry, ventilated area. Containers require venting bungs to avoid over pressure, Storage more than 6 months not recommended |
| Others | Chroma: ≤ 40 |
Product Details:
| Packaging Type | Bag,Sac |
| State of Matter | Granular,Solid,Crystals |
| Features | Oil Resistant,Heat Resistant,Cold Resistant |
| Grade Standard | Industrial Grade,Chemical Grade |
| Appearance | Yellowish to yellow liquid | |
| Assay | ≥40.0 | |
| pH | 41554 | |
| Solubility | Well soluble in water | |
| Density | 1.05-1.12 | |
| Packing | dry place | |
| Phosphorous acid (as PO33)% | 50-250mg/L | |
| 25kg Use | Low foam wetting agent in nickel bath | |
| Storage | Stored in cool and |
Additional Information:
Product Details:
| Packaging Type | Bag , Sac |
| State of Matter | Granular |
| Packaging Size | Customized |
| Grade Standard | Chemical Grade, Industrial Grade |
| Chemical Formula | C10H12FeN2NaO8 |
| Molecular weight | 367.05 |
| Description | A yellow or yellowish brown crystalline powder |
| Solubility | Soluble in water |
| pH (1% w/v) | Between 4.0 to 6.5 |
| L.O.D | NMT 10% w/w |
| Free Iron | Less than 200 ppm |
Product Details:
| State of Matter | Liquid |
| Features | Heat Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Physical State | Liquid |
| Empirical formula | :: | c17h38nbr |
| Appearance | :: | clear colourless to pale yellow liquid |
| Assay (by titration) | :: | 40 % (+ / - 2%) |
| Free amine amine salts | :: | nmt 1. 0 % |
Product Details:
| Packaging Type | Drum |
| State of Matter | Liquid |
| Features | Oil Resistant , Heat Resistant |
| Grade Standard | Industrial Grade |
| Appearance | Colorless clear liquid |
| Assay | 99.00+ % BY G.C |
| Specific Gravity | 0.86600 to 0.87400 @ 20.00 °C |
| Pounds per Gallon – est. | 7.214 to 7.281 |
| Refractive Index | 1.40400 to 1.40800 @ 20.00 °C |
| Boiling Point | 156.00 to 160.00 °C.@ 760.00mm Hg |
| Flash Point | 118.00 °F. TCC (47.78 °C.) |
| Acid Value | 1.00 max. KOH/g |
| Vapor Pressure | 2.360000 mm/Hg @ 25.00 °C.(est) |
| Vapor Density | 4.9 (Air = 1) |
| Suggested Uses | Cheese, Cherry, Chocolate, Hard Fruits, Orange, Peach, Soft Fruits, Strawberry, Tropical Fruits |
| Odour | apple; apricot; banana; citrus;pineapple; tomato; -like |
| Packing Detail | 0.5kg to 170kg |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Appearance | Pale yellow, Green Color |
| Available Chlorine | 20 - 180 GPL |
| Free Alchaly | As per client requirement |
| PH | 13-Nov |
| Packing | 35 liter, 50 liter, 20 kg tanker load |
| Weight | 74.5 |
| Applications | Used in Textile, Paper bleaching, etc. |
Product Details:
| Packaging Type | Bag , Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Appearance | Red brown liquid |
| Assay | ≥50.0 |
| pH | 41548 |
| Solubility | Well soluble in water |
| Density | 1.12-1.18 |
| Packing | 25kg |
| Use | Brightener and leveling agent at LCD in nickel bath |
| Storage | Stored in cool and dry place |
| Phosphorous acid (as PO33)% | 20-60mg/L |
Additional Information:
Product Details:
| Physical State | Granules, Crystals, solid |
| Usage | Commerical, Laboratory, Industrial |
| Grade Standard | Bio-Tech Grade, Technical Grade, Reagent Grade |
| Name | 1-BOC-pyrrole-2-boronic acid, pinacol ester |
| CAS/SN | 1072944-98-9 |
| Synonyms | 1-boc-pyrrole-2-boronic acid, pinacol ester,1072944-98-9 |
| Encyclopedia | Encyclopedia Of 1-BOC-pyrrole-2-boronic acid, pinacol ester |
Additional Information:
Product Details:
| Form of Chemicals | Off white amorphous powder |
| CAS No | 7681-65-4 |
| Molecular formula | CuI |
| Molecular weight | 190.44 |
| Appearance | Off white amorphous powder |
| LOD | 0.5% max |
| Sulphate | 0.05 % max |
| Assay | 99.0 % min |
Product Details:
| Packaging Type | Bag , Packet |
| Packaging Size | Customized |
| Physical State | Powder |
| CAS No: | 304-91-6 |
| Molecular formula | C7H5O3I |
| Molecular weight | 279.9 |
| Appearance | Off white to cream coloured crystalline solid |
| Melting range | 220-230 °C (explosion) |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| Packaging Size | Customzied |
| Appearance | Yellow liquid |
| Use | Used for organic synthesis |
| Storage | Keep container tightly closed. Store in a cool, dry place in tightly closed containers. Ensure good ventilation at the work place. |
Additional Information:
Product Details:
| Packaging Size | Customized |
| Form of Chemicals | Liquid |
| Molecular Formula | C6H5MgBr |
| Molecular Weight | 181.31g/mol |
| Density | 1.13 g/mL at 20 °C |
| Appearance (Color) | Dark Yellow to Brown |
| Appearance (Form) | Liquid |
| Titration | 2.90M to 3.10M |
| Sedimentation | NMT 2% W/W |
Product Details:
| Packaging Type | Bag,Sac,Packet |
| State of Matter | Solid,Granular |
| Features | Oil Resistant,Heat Resistant |
| Molecular formula | c8h8o2 |
| Molecular weight | 136.15 |
| Appearance | yellow to light yellow powder |
| Solubility | soluble in ether, alcohol & partly soluble in water |
| Moisture | nmt 0. 5% |
| Melting point | 95 – 97 °c |
| Lod | nmt 0. 5% |
| Purity by gc | nlt 98% |
Product Details:
| Packaging Type | Beaker' |
| State of Matter | Liquid |
| Packaging Size | 33 ml |
| Appearance | Clear Light Yellow Liquid. |
| Tin Content | 34 – 34.50 % |
| Chloride Content | 1.50 – 2.50 % |
| Density (gm/cc at 20º C) | 1.07 – 1.09 |
| Refractive Index | 1.474 (± 0.0025) |
| Boiling Point | 140º C at 10 mbar. |
| Solubilty | Slightly Soluble in Water at 20º C |
Product Details:
| Functions | Antioxidants,Lubricants |
| Categories | Adhesives,Oil Field Chemicals |
| Form of Chemicals | Liquid |
| Test | Specification | Results |
| Appearance | yellow to light yellow power | light yellow powder |
| Solubility | Soluble in ether, alcohol & parthy soluble in water | Complies |
| Moisture | NMT 0.5% | 0.0041 |
| MELTING POINT | 95 – 97 °C | 96 °C |
| LOD | NMT 0.5% | 0.0042 |
| Purity by GC | NLT 98% | 0.9944 |
Product Details:
| Functions | Antioxidants,Lubricants |
| Categories | Adhesives,Agrichemicals |
| Form of Chemicals | Liquid |
| Molecular weight | 285.93 |
| Molecular formula | c5h6br2n2o2 |
| Assay ( iodometric ) | 98% min |
| Bromine content | 55% min |
| Chlorine content | 0.5% max |
| Loss on drying( 1h / 60 ° c / 1 mm hg ) | 1%max |
| Solubility | insoluble in water |
| Melting point | > 180°C decomposes |
| Appearance | cream powder with a faint |
| Odour | character odour of bromine |
| Packing | 25/50 kgs double liner polyethylene bag in fiberdrum or corrugated box |
Product Details:
| Packaging Type | Bag, Sac, Packet |
| Packaging Size | Customized |
| A | Properties | Zeosil Super |
| 1 | Appearance | Free Flowing Powder |
| 2 | Color | Cream Yellow to White |
| 3 | Bulk density (gm / cc) | 0.68 -0.72 |
| 4 | PH (2 % Slurry) | 3.0-4.0 |
| 5 | Moisture | 39730 |
| 6 | Particle Size | |
| . | 100 mesh | 1 |
| . | 200 mesh | xxxx |
| . | 230 mesh | 0.9 |
| 7 | Filtration rate | Consistently comparable with international standards. |
| 8 | Required dosage % | xxxx |
| 9 | Oil Retention | < 20% |
| 10 | Recommended Oil | Soya |
| 11 | Residual Acidity | 0.2 |
| 12 | Manufacturing Process | Acid Activated Proprietary Processed Bleaching Earth |
| 13 | Heavy Metal Content | NIL |
Product Details:
| Packaging Size | Customized |
| Physical State | Liquid |
| State of Matter | Liquid |
| Test Description | Specification Limits Min. Max. | Unit of Measure | Test Method |
| Butyl Glycol | 99 | %(w/w) | |
| Water | 0.1 | %(w/w) | ASTM E-203 |
| Acidity as Acetic acid | 0.01 | %(w/w) | ASTM D-1613 |
| Colour, PTCO | 10 | ASTM D-1209 | |
| Specific Gravity | 0.9005 | 0.904 | ASTM D-4052 |
| Density 20oC | 0.95 | 0.95 | Kg/l |
| Appearance, P/F | Clear, Clean Liquid | ASTM D-2090 |
Product Details:
| Packaging Type | Customised |
| Packaging Size | Customised |
| Physical State | Liquid |
| Molecular formula | C6H5CH2CH2CH=CH2 |
| Molar mass | 132.2 |
| Density | 0.88 g/mL |
| Boiling point | 175-177 °C |
| Purity | 0.99 |
| Flashing Point | 60°C |
Additional Information:
Product Details:
| Packaging Size | Customized |
| Physical State | Crystals |
| State of Matter | Granular |
| Molecular Formula » | NH2.SO3H | ||
| Molecular Weight » | 97.09 | ||
| Description » | White Crystalline Powder | ||
| Specifications » | Solubility | Very soluble in water | |
| Non volatile matter | Not more than 0.2% | ||
| Assay | Min99% | ||
Additional Information:
Product Details:
| State of Matter | Liquid |
| Packaging Size | customized |
| Physical State | Liquid |
| Molecular Weight | 74.12 |
| Formula | (C2H5)2O |
| UN/Class Number | -272038 |
| Risk and safety phrase | R12, R19, R22, R66, R67, S2, S9, S16, S29, S33 |
| CAS Number | 60-29-7 |
| EEC Number | 200-467-2 |
Product Details:
| Packaging Type | Bag |
| State of Matter | Granular , Solid |
| Features | Oil Resistant , Cold Resistant, Heat Resistant |
| Other Names | DMM |
| Molecular Formula | C6H8O4 |
| EINECS No. | 205-451-9 |
| Purity | 99.5%min |
| Application | used as organic synthesis intermediate |
| Appearance | Colorless transparent liquid |
Product Details:
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Appearance | Colorless liquid |
| Boiling point | 168 - 170 deg C |
| Flash point | 56 deg C ( 132.80 deg F) |
| Storage | Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container. |
Additional Information:
Product Details:
| Packaging Type | Sac , Packet, Bag |
| State of Matter | Powder |
| Molecular Formula | C6H6N2O2 |
| Molecular Weight | 138.14 |
| Density | 1.4 |
| Appearance | Yellow to Orange Crystal or powder (Brownish) |
| Melting Point | 147-1500 C on drying |
| Moisture Content | 6-10% Maximum ( W/C) |
| Assay by G.C. | 99.50% on Dry Basis |
| Solubility | Soluble in hot water, Ether, Chloroform Benzene |
| Impurity | 0.2% Maximum PNCB |
| Packing Detail | 50Kgs HDPE bags |
Additional Information:
Product Details:
| Packaging Type | Bag , Drum, Sac |
| Packaging Size | Customised |
| Appearance | Colorless clear liquid |
| Assay | 99.00 % +BY G.C |
| Specific Gravity | 0.86100 to 0.86900@ 20.00°C |
| Boiling Point | 184.00 to 185.00 °C.@ 760.00 mm Hg |
| Flash Point | 135.00 °F. TCC (57.22 °C.) |
| Acid Value | 0.10 max. KOH/g |
| Vapor Pressure | 0.950000 mm/Hg @ 20.00 °C |
| Vapor Density | 5.5 (Air = 1) |
| Odour | Fruity, sweet estry, green, tropical, apple and melon-like with tutti frutti notes |
| Packing detail | 0.5kg to 170kg |
Product Details:
| Packaging Type | Bag , Sac, Packet |
| State of Matter | Liquid |
| Packaging Size | Customized |
| Appearance | clear to pale yellow liquid |
| Assay | 95.0% min |
| Acidity | 6 max (mg KOH/g) |
| Use | Common ingredient in perfumery. It''s end applications include soap, detergent, beauty care product, household product. (Olfactive Note : aldehydic, intense, sweety, strawberries, floral, fresh ) |
Additional Information:
Product Details:
| Packaging Type | Packet , Sac, Bag |
| Packaging Size | Customized |
| Appearance | Colorless clear liquid |
| Assay | 99.00 %+ BY G.C |
| Specific Gravity | 0.98100 to 0.98900 @ 25.00 °C |
| Boiling Point | 245.00 to 246.00 °C. @ 760.00 mm Hg |
| Acid Value | 1.00 max. KOH/g |
| Vapor Pressure | 0.017000 mm/Hg @ 25.00 °C |
| Flash Point | > 212.00 °F. TCC ( > 100.00 °C. ) |
| Odour | Sweet, fruity and slightly powdery with a musty background |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| Packaging Size | Customized |
| Molecular Formula | ZnO |
| EINECS No. | 215-222-5 |
| Grade Standard | Industrial Grade |
| Purity | 95% |
| Appearance | white powder |
| Application | Rubber, ceramics, glass, cable, high-class paint and other industries |
| Molecular Weight | 81.834 |
| Packing | Polypropylene woven bags or kraft paper bags lined with plastic film bags, 25 kg in net weight each |
Additional Information:
Product Details:
| Packaging Type | Sac , Bag, Packet |
| Packaging Size | Customized |
| Appearance | White crystal or primrose transparent liquid |
| Assay | 98.50% Min |
| Purity Standard | 99.00% Min |
| Melting point | 33-35 C° |
| Ignited residue | 0.10% Max |
| Insoluble matter in aceton | Null |
Product Details:
| Packaging Type | Bag , Drum, Sac |
| Packaging Size | Customized |
| Assay | 0.991 |
| Iron (Fe) | 0.00001 |
| Chloride and Chlorate (as Cl) | 0.0001 |
| Moisture | 0.001 |
| Heavy Metals (as Pb) | 0.00001 |
| Manganese (Mn) | 0.000001 |
| Active Oxygen | 0.0586 |
Product Details:
| Features | Heat Resistant , Oil Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| State of Matter | Liquid |
| Molecular Formula | C8H14O4 |
| Purity | 99.00%min |
| Appearance | Colorless transparent liquid |
| Molecular weight | 174.19 |
| PH | 6 |
| Moisture | 0.10% |
| Density | 1.047 g/mL at 25 °C(lit.) |
| vapor density | 6 (vs air) |
| FEMA | 2377 |
| Refractive index | n20/D 1.42(lit.) |
| Melting point | -20 °C |
| Boiling point | 218 °C(lit.) |
| Flashing point | 195 °F |
| Packaging Details | In steel drums with 200 kg net each |
Product Details:
| State of Matter | Liquid |
| Grade Standard | Chemical Grade, Industrial Grade |
| Appearance | Clear Light Yellow Liquid |
| Tin Content | 15 – 15.50 % |
| Specific Gravity (gm/cc at 25º C) | 1.09 (± 0.02 %) |
| Refractive Index | 1.449 (± 0.005 %) |
| Solubilty | Soluble in almost all organic solvents. Insoluble in Water |
Product Details:
| Packaging Type | Bag , Drum, Sac |
| Packaging Size | Customized |
| Description | White solid |
| Insoluble matter | Max 0.01% |
| PH (5%aq. Solution) | 8.7-9.3 |
| Assay | Min 99.0% |
| Chloride (Cl) | Max 0.002% |
| Sulphate (SO4) | Max 0.005% |
| Iron (Fe) | Max 0.002% |
| Heavy Metals (Pb) | Max 0.001% |
| Loss on drying | Max 0.2% |
Product Details:
| Packaging Type | Bag , Packet, Sac |
| Packaging Size | Customized |
| Trade name | : | sulfo tobias acid |
| Chemical name | : | 2-napthylamine 1,5 disulphonic acid |
| Strength | : | 60% minimum |
Product Details:
| State of Matter | Liquid |
| Grade Standard | Chemical Grade, Industrial Grade |
| Common Name | 4-Nitrobenzonitrile, p-Cyanonitrobenzene, 4-Cyanonitrobenzene, p-Nitrobenzonitrile, |
| Molecular Formula | : C7H4 N202 |
| Molecular Weight | 148.12 |
| Structural Formula | xxxx |
| Colour | White to light yellow crystalline powder |
| Melting Range | 148 – 152 ° C |
| Purity | 99.0 % min. |
| Packing | 50 Kgs. HDPE Bag in Powder Form. 150 Kgs. In UN Approved M.S. Drums. As per Customer’s Requirement |
| CAS NO. | 619 – 72 - 7 |
| ITC NO. | xxxx |
| UN NO. | 3276 |
Additional Information:
Product Details:
| Packaging Type | Packet , Bag |
| State of Matter | Granular |
| Packaging Size | Customized |
| Other Names | Sodium Dichloro Isocyanuric (SDIC) |
| Grade Standard | Industrial Grade |
| Appearance | WHITE |
| Molecular Formula | C3O3N3CI2Na |
| Appearance | White powder, granular, or Tablet |
| Effective Chlorine | %≥56.0 60.0 |
| PH(1%Solution) | 5.5-7.0 |
Product Details:
| Packaging Type | Packet , Bag |
| State of Matter | Liquid |
| Packaging Size | Customized |
Product Details:
| Packaging Size | 25kgs net in color printed peritoneal woven bag lined with polyethylene bag |
| Mooney Viscosity , MB (100º C) | 47-57 |
| Viscosity Spread | ±4 |
| Conditional tensile strength, Not less than | 22MPa ( 225 kgs/cm² ) |
| Elongation at rupture | 550-750% |
| Rebound elasticity, not less than | 20.00% |
| Packages | 25kgs net in color printed peritoneal woven bag lined with polyethylene bag |
Product Details:
| Packaging Type | Packet |
| State of Matter | Granular |
| Features | Oil Resistant |
| Appearance | Clear yellowish liquid |
| Assay | ≥25.0 |
| Solubility | Well soluble in water |
| Packing | 25kg |
| Use | Assistant brightener in nickel bath |
| Storage | Stored in cool and dry place |
| Phosphorous acid (as PO33)% | 1-2g/L |
Additional Information:
Product Details:
| Packaging Type | Bag,Sac,Packet |
| Packaging Size | Customized |
| Solubility (10% aq. Solution) | Clear colourless |
| Ph(5%aq. Solution) | 4.3-4.5 |
| Assay | Min 99% |
| Chloride (Cl) | Max 0.001% |
| Sulphate (SO4) | Max 0.005% |
| Iron (Fe) | Max 0.0005% |
| Heavy Metals (Pb) | Max 0.0005% |
| Total Nitrogen(N) | Max 0.001% |
| Potassium(K) | Max 0.005% |
Product Details:
| State of Matter | Crystals |
| Grade Standard | Industrial Grade,Chemical Grade |
| Product | 3,5-Dinitrobenzoic acid |
| Molecular formula | C7H4O6N2 |
| Molecular weight | 212.12 |
| Description | off-white crystals. |
| Solubility | soluble in methanol |
| Melting point | 202' C |
| Moisture Content | 0.5% Max. |
| Residue on ignition | 0.5% max. |
| Assay | 98% min. |
Additional Information:
Product Details:
| Functions | Antioxidants |
| Categories | Adhesives,Oil Field Chemicals |
| Form of Chemicals | Liquid |
| Common Name | meta chlorophenol/m-chlorophenol/3-chlorophenol /3-chloro phenol / m chloro phenol |
| Molecular Formula | 3 CI(C6H6)OH |
| Molecular Weight | 128.5 |
| CAS NO. | 108-43-0 |
| UN NO. | 2020/2021 |
| Synonyms | m-Chlorophenol, 3-chlorophenol, meta chlorophenol, m chloro phenol |
Additional Information:
Product Details:
| Packaging Type | Bag,Sac,Packet |
| Packaging Size | Customized |
| Physical State | Liquid |
Additional Information:
Product Details:
| Functions | Antioxidants,Lubricants |
| Categories | Adhesives,Oil Field Chemicals |
| Form of Chemicals | Liquid |
| CAS number | 2295-31-0 |
| Molecular formula | c3h3no2s |
| Formula weight | 117. 13 |
| Appearance | White fine crystals with lumps |
| melting range | 125°c-127°c |
| Moisture content | Not more than 0. 7 % |
| Solubility | Soluble in water & methanol |
| Solubility (colour)in ch3oh | Colorless |
| Assay on GC | 99% minimum |
| Unknown impurity | Less than 1. 0% |
Product Details:
| State of Matter | Liquid |
| Features | Heat Resistant |
| Grade Standard | Industrial Grade |
| Trade name | 3-Amino Phenyl Urea Meta Ureido Aniline |
| Chemical name | 3-Amino Phenyl Urea |
| Strength | 65% w/w Minimum |
Product Details:
| State of Matter | Liquid , Solid |
| Features | Acid Resistant |
| Grade Standard | Industrial Grade |
| Ho2 o3 | m. W. 377. 88 |
| Identity | conforms |
| Assay | min. 99. 9% |
| (Calculated on calcined substance ) |
Additional Information:
Product Details:
| Features | Acid Resistant |
| Grade Standard | Industrial Grade, Chemical Grade |
| Appearance | colourless liquid with characteristic smell |
| Tin content | minimum 38. 90 % |
| Density (gm/cc at 20º c) | 1. 14 – 1. 15 |
| Boiling point | 220 - 230º c at 13 mbar |
| Solubilty in water | 71. 2mg/litr. At 20º c |
| Solubility in solvents | in most of organic solvents |
Product Details:
| Packaging Size | Customized |
| Physical State | Liquid |
| State of Matter | Liquid |
| Molecular Formula | (CH3CH2CO)2O |
| Molecular Weight | 130.14 g/mol |
| Boiling Point | 167 °C(lit.) |
| Melting Point | -43 °C(lit.) |
| Density | 1.015 g/mL at 25 °C(lit.) |
| Appearance (Color) | Colorless |
| Appearance (Form) | Liquid |
| Identity | Confirms to structure by IR |
| Purity (GC) | ≥ 96% (Min) |
| Titration With Morpholine | 96.5% - 103.5% |
Additional Information:
Product Details:
| Packaging Type | Glass Tube |
| State of Matter | Liquid |
| Features | Heat Resistant |
| Appearance | Umber transparent liquid |
| pH | 6.0-8.0 |
| Iron content | 20max |
| Density | 1.34-1.44 20 ºCg/cm3 |
| Chloride | 5.0max |
| Packing | 250 kgs |
| Use | DTPMP·Na7 is a scale inhibitor, for barium sulphate in particular and a chelating agent. DTPMP·Na7 can be used as stabilizer for peroxide bleaching, detergent auxiliaries, in industrial & municipal cleaning water, terrestrial heat water, oilfield water, etc. |
| Storage | Storage for ten months in room shady and dry place. |
| Others | PH 1% water solution-7.0-9.0 |
| Dryness weight loss % | 25.9-27.9 |
| Active content (DTPMP·Na7)% | 31.5-33.5 |
| Active component (as HDTPMA) % | 40.0-42.5 |
Product Details:
| State of Matter | Liquid |
| Grade Standard | Elemental Gases |
| Physical State | Liquid |
Application:
SV cat 100 is a neutral catalyst used to boost up reaction rate increase the yield of the products, improves colour, better control of reaction in esterification, trans-esterification, polycondensation reactions for unsaturated polyesters, fatty acid esters, phthalate / adipate esters, treamellitates. recommended doses:approximately 0. 1 % of total reaction mass. packing: 20 kgs. HDPE open mouth drum with liner.
Product Details:
| State of Matter | Liquid |
| Packaging Size | Customized |
| Physical State | Liquid |
| Molecular Formula | C11 H22 O |
| Molecular Weight | 170.2 |
| Boiling Point | 216°C |
| Assay | Trans isomer- 95.0 to 100.0 CIS isomer- 0.0 to 5.0 Sum isomers - 98.0 to 100.0 |
| Appearance | Colorless to pale yellow, slightly viscous liquid |
| Specific Gravity | 0.8410 to 0.8470 |
| Refractive Index | 1.4490 to 1.4540 |
| Flash Point | 100°C |
| Solubility | Soluble in alcohol, insoluble in water |
Additional Information:
Product Details:
| Categories | Adhesives , Agrichemicals |
| Functions | Antioxidants , Biocides |
| Form of Chemicals | Liquid |
| Molecular Weight | 74.12 |
| Formula | (C2H5)2O |
| UN/Class Number: 3/1155 | 3/1155 |
| Risk and safety phrase | R12,R19,R22,R66,R67,S2,S9,S16,S29,S33 |
| CAS Number | 60-29-7 |
| EEC Number | 200-467-2 |
Product Details:
| Categories | Adhesives , Agrichemicals |
| Functions | Antioxidants , Biocides |
| Form of Chemicals | Liquid |
| Characteristic | Requirement |
| Definition | contains not less than 98. 0 per cent and not more than 105. 0 per cent of cahpo42h2o |
| Description | white crystalline powder odourless |
| Solubility | practically insoluble in water and in ethnol (95%), it dissoloves in dilute hydrochloric acid, and in nitric acid. |
| Identification a) phosphates b) calcium salts | positive positive |
| Acid insoluble substance %max | 0.1 |
| Arsenic ppm max | 10 |
| Barium | to pass the test |
| Heavy metals ppm max | 40 |
| Iron ppm max | 400 |
| Carbonates | to pass the test |
| Chloride ppm max | 1250 |
| Sulphate % max | 0.5 |
| Reducing substances | to pass the test |
| Nitrate | to pass the test |
| Proteinous impurities | nil |
| Loss on ignition | 24. 5 to 26. 5% at 500 c |
| Monocalcium and tricalcium phosphates | not less than 11. 0 ml and not more than 12. 5 ml of 1 m hydrochloric is required. |
| Assay % of cahpo4. 2h2o | 98. 0 to 105. 0 |
Product Details:
| Categories | Adhesives , Agrichemicals |
| Functions | Antioxidants |
| Form of Chemicals | Liquid |
| Physical state and appearance | viscous liquid. |
| Odor | little or no odor. |
| Color | clear, colorless to white |
| Flash point | ~ 127 °c (260. 6 °f) (pmcc) |
| Boiling point | ~ 212 °c (413. 6 °f) @ 760 mm hg |
| Melting point | < -54 °c (-65. 2 °f) |
| Vapor pressure | < 0. 1 mm hg @ 20 °c (68 °f) |
| Vapor density | ~ 3. 2 (air = 1. 0 at 15 – 20 °c/59 – 68 °f) |
| Solubility | complete (in all proportions). |
| Assay, weight % | 98 |
| 2 -1,3-pentanediol | weight % |
| Water, weight % | 0.1 |
| Carbonyl as cho, ppm | 500 |
Product Details:
| Packaging Type | Customised |
| Packaging Size | Customised |
| Usage | Industrial, Commerical |
| Appearance | coarse powder |
| Bulk density (gm/cc) | 0. 80 (± 0. 05) |
| Metal content | 40 – 42 % |
| Specific gravity | 1. 40 (± 0. 05) |
Product Details:
| Packaging Type | Customised |
| Packaging Size | Customised |
| Molecular Formula | C12 H16 O 3 |
| Molecular Weight | 206 |
| Boiling Point | 278 °c |
| Acid value | 0.0-1.0 mg KOH/g |
| Assay | 98.00 %(Minimum),Single Isomer |
| Appearance | Light viscous liquid |
| Visual color | Clear Colour less liquid |
| Specific Gravity | 1.045- 1.057 |
| Refractive Index | 1.503 - 1.510 |
| Flash Point | 99.8°c |
| Stabilizers | NIL |
Additional Information:
Product Details:
| Categories | Adhesives , Agrichemicals, Oil Field Chemicals |
| Functions | Antioxidants , Lubricants, Biocides |
| Form of Chemicals | Solid , Granules |
| Molecular Weight | 210.23 |
| Molecular Formula | C6H5COCOC6H5 |
| Appearance | yellow powder |
| Melting Point | 94degC Min. |
| % Assay | 99.0 % Min. |
| Loos on Drying | 0.5% Max |
Product Details:
| Categories | Adhesives , Oil Field Chemicals |
| Functions | Lubricants , Antioxidants |
| Form of Chemicals | Liquid |
| Skin | Inhaled |
| Harmful if absorbed through skin. Material is extremely destructive to skin. | Harmful if inhaled. Material is extremely destructive to the mucous membranes and upper respiratory tract. Inhalation may result in spasm, inflammation and edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. |
Product Details:
| Grade Standard | Food Grade, Industrial Grade |
| Precipitation State | Precipitated |
| Application | Construction Industry |
Keeping in mind the diverse requirement of our clients we are involved in offering a superior quality of Calcium Carbonate. Our range of Calcium Carbonate is extensively used in different other sectors. They are excellent finished during the whole process of manufacturing and other processing. We are considered as one of the trustworthy and prominent organization of this industry, due to our utmost efforts for maintaining the quality.
Features:
Product Details:
| Form of Chemicals | orange to yellow crystalline powder |
| Empirical formula | c16h36nbr3 |
| Molecular weight | 482.18 |
| Appearance | orange to yellow crystalline powder |
| Assay (by titration) | nlt 98 % |
Additional Information:
Product Details:
| State of Matter | Liquid |
| Grade Standard | Chemical Grade, Industrial Grade |
| Appearance | Clear liquid, Colorless free form suspension |
| Color, Pt-Co Units | 3 |
| Specific Gravity (20/20oC) | 0.854 |
| Acidity, % by wt | 0.002 |
| Water, % by wt | 0.011 |
| Purity, GC-% | 99.9 |
Product Details:
| Packaging Type | Sac , Packet, Bag |
| State of Matter | Solid |
| Packaging Size | Customized |
| Appearance | Solid. (Powdered solid.) |
| Assay | K-Value: 27-33 |
| Specific Gravity | 1.23 - 1.29(Water = 1) |
| Odour | Odorless. |
| Solubility | Soluble in cold water.Soluble in chloroform, alcohol, chlorinated hydrocarbons, amines, nitropariffins, lower weight fatty acids. |
| Melting point | 13.9°C (57°F) |
| Boiling point | 90°C (194°F) - 93 C |
| Moisture | <5.0 |
| Packing | 25 kgs |
| Use | It can be use as binder in tablets,capsules and granules,as a stabilizer for oral suspensions, film-forming agent, solubilizing agent, dispersant for pigments,as an enzyme stabilizer and to improve bioavailability. |
| Storage | Keep container tightly closed. Keep container in a cool, well-ventilated area. Hygroscopic |
Additional Information:
Product Details:
| State of Matter | Crystals |
| Molecular Formula | C16H13F2N3O |
| State | Powder |
| Purity : | 95% |
| Application | Used agriculturally to treat plant pathogenic fungi |
| Color | off white |
| Molecular weight | 301.3 |
| Appearance | Off white crystalline powder |
| Active ingredient | 95% Min |
| Moisture | 01.00% Max |
| Acidity as H2SO4 | 00.50% Max |
| Acetone insolubles | 00.50% Max |
| Packing | 25 kg Fibre drums |
Additional Information:
Product Details:
| Form of Chemicals | Liquid |
| Appearance | pale yellow liquid |
| Density (gm/cc at 20º c) | 1.31 |
| Freezing point | 5 - 10º c |
| Boiling point | 139º c |
| Solubility | insoluble in water & most of organic solvents |
Product Details:
| Form of Chemicals | Liquid |
| Packaging Size | Customized |
| Appearance | Pinkish white soft solid waxy mass |
| Mono ester content | Min 35 % |
| Acid value | Max 5. 0 mgkoh/gm |
| Saponification value | 195 to 205 ( 200 ± 5 ) mgkoh/gm |
Product Details:
| State of Matter | Liquid |
| Molecular Formula | C14 H20 O2 |
| Molecular Weight | 220 |
| Boiling Point | 300°c |
| Assay | Sum of Isomers 97-100 % |
| Appearance | Clear Colourless to pale yellow liquid, Non- viscous liquid |
| Specific gravity | 1.021 – 1.029 |
| Refractive Index | 1.480 – 1.486 |
| Flash Point | 100°C |
| Solubility | Soluble in alcohol, insoluble in water |
Additional Information:
Product Details:
| Categories | Adhesives , Agrichemicals, Oil Field Chemicals |
| Functions | Lubricants , Biocides, Antioxidants |
| Form of Chemicals | Solid , Granules |
| Molecular formula | C5H10O |
| Molar mass | 86.13g/mol |
| Density | 0.949g/ml |
| Boiling point | 139 140 |
| Flash Point | 51 |
| Purity | 99.0% min |
| Moisture | 0.3% max |
Additional Information:
Product Details:
| State of Matter | powder |
| Molecular formula | Na2SeO3.5(H2O) |
| Molecular weight | 263.01 |
| Appearance | White to off white crystalline powder |
| Solubility | Freelly soluble in water |
| Selenate & Sulphate | NMT 50 ppm |
| Chloride | NMT 50 ppm |
| pH of 10% solution | 9.8 to 10.8 |
| Assay | 98.5-101.5 % |
Additional Information:
